| ||||||||||||||||||||
 | ||||||||||||||||||||
|
||||||||||||||||||||
1. Safety glasses: These prevent dust, debris, wood shavings, shards from fiberglass, etc from getting into the eyes. Safety glasses are one of the most basic pieces of safety equipment that must be used when working with power tools. 2. Protection for the ears: Power tools can generate a lot of noise, which may sound louder in the cloistered environment of a workshop; in order to minimize damage to the ears, it is advisable to wear earplugs. 3. Knowing the right tools for the job: It is important to know the right tools for the job in order to avoid injury to oneself and damage to the materials. To this end, it is advisable to thoroughly read the instruction manuals provided with the equipment and get familiar with the recommended safety precautions. 4. Correct method of using tools: Tools should not be carried by their cords; tools that are not in use should be disconnected; and while handling a tool connected to a power source, fingers should be kept away from the on/off switch. 5. The right clothes: Long hair should be tied and loose clothing should be avoided. Ideally, clothing that covers the entire body should be worn and heavy gloves should be used in order to avoid sharp implements and splinters from hurting the hands. Masks prevent inhalation of harmful minute particles of the material that is being worked upon. Steel-toed work boots and hard hats can also be worn. 6. Tool inspection: Power tools should not be employed in wet environments and should never be dipped in water; they should be checked periodically for exposed wiring, damaged plugs, and loose plug pins. Nicked cords can be taped but if a cut appears to be deep, a cord should be replaced. Tools that are damaged or those that sound and feel different when used should be checked and repaired. 7. Cleanliness in the work area: This should be maintained because accumulated dust particles in the air can ignite with a spark. Of course, flammable liquids should be kept covered and away from the place where power tools are being used. An uncluttered work area also makes it easy to maneuver the power tool; often distractions caused by a tangled cord can result in an accident. 8. Care with particular tools: Miter saws and table saws should be used with a quick-release clamp and a wood push-through, respectively. Extra care should be taken while using nail guns and power belt sanders. 9. Keep tools in place: Power tools should be returned to their cabinets after use to prevent them from being used by an unauthorized and incapable person. 10. Lighting: It is important to use proper lighting while working with power tools, particularly when working Unique Tin Can Candle Holders jeremy gauthier 114d Unique Tin Can Candle Holders Ah yes the good old Tin Can. The tin can has been around for years, providing many different projects to be made from tin cans. They are one of the most versatile mediums for crafts, besides wood and foam. Best part about them, they are cheap. Tin cans can be used to make all kinds of candle holders, providing a unique touch to your home or garden. In this article, we will share some ideas on how to make interesting and unique candle holders out of tin cans. There are two primary size tin cans, soup cans and coffee cans. Both offer a wide variety of different craft ideas. Tin cans can be cut, punched, painted, weathered and modified in multiple ways. They can be set on top of a table or hung out in the garden. Let's start with the basics. Most people will decide to punch holes into the can, which is the easiest. However you can use any type of cutting tools. A drill is handy, but even better is a Dremel tool. But for those who will be using a hammer or even a drill, let's start there. Before you start anything, fill the can with water and freeze it. This will allow you to punch holes easier, with out bending the can. It always helps to have some kind of plan or design in your head or on paper. In fact drawing the design out on paper allows you to modify it and then tape it around the tin can as a template. Think about weather or not you may want to paint the tin can or weather proof it for outside garden use. One example of a design is a simple western motif. Download of a silhouette graphic of a dog howling at the moon. With the Dremal tool cut out the scene on the tin can. After painting it black and punching two holes at the top, you can hang it in a garden. Simpler designs would include punch out designs such as creating a bunch of tiny wholes to create a night sky effect. Patterns also look great. Once you have cut out a design, painting time can finish the look of your candle holder. Allot of times I'll choose black, because the light will shine through better at night or in a dim room. A light blue and white to match your kitchen décor will add a unique touch. You can add almost any type of embellishing to the can, such as colored stones or ribbon. For those of you who want a more elaborate candle holder, try the larger coffee cans. They provide a larger area to work with. One idea for the larger cans is to cut wholes about half inch in diameter and attach pieces of stained or any colored glass on the inside of the can. You could create an entire stained glass tin can candle holder. The larger cans are also great for outdoors. Their large base is perfect for decks and walk ways, as they will not tip over easily. By cutting slits down the sides of cans you can bend the edges downward, creating nice flared out look. Just remember to file down the edges, they will be sharp. For an added flare, twist the ends with a pair of pliers. There is a lot you can do with this method and even adding other cut out pieces to the cans. You could create angled top for the can, just like a lantern. With a little bit of imagination and paint, you can turn any tin can into something worth putting on a table or mantle. So experiment and have fun. Don't worry about messing up; I'm sure you have plenty of cans lying around. To find more articles on Candle Decorating, Candle Scaping or Decorating Tips, visit www.expressivecandles.com. Written by: Michelle and Jeremy Gauthier - info@expressivecandles.com December 18, 2003 - This article is copyright by www.ExpressiveCandles.com Expressive Candles offers Scented Hand Poured Candles and a growing collection of Candle Decorating and Candle Scaping articles. About the AuthorJeremy co-owns and runs a small candle making company in Florida. Expressive Candles offers Scented Hand Poured Candles and a growing collection of Candle Decorating and Candle Scaping articles. 2chttp://www.aaarticles.com/article9427.html | ||||||||||||||||||||
