| ||||||||||||||||||||
 | ||||||||||||||||||||
|
||||||||||||||||||||
The jig saw concept first came about when an engineer attached a saw blade to his wife's sewing machine. Jig saws are used to cut out intricate patterns in the material you are shaping. If you need a curved edge or a circular cut out in the center of your material, a jig saw is the tool to do it. A jig saw blade moves in a rapid up and down motion to cut the material you are working with. The important thing to remember is that your body is softer than the material you are cutting and the blade will cut through you faster than the material. Be observant of where the blade is at all times and avoid cutting yourself. Bosch power tools were the first toolmakers to offer a jig saw to consumers. Bosch power tools are designed to aid in the workplace by being built to withstand the punishment professionals give their tools in the rush to finish work on time. Most are built to withstand a drop of ten feet and still work reliably afterwards. After vibration was noticed as detrimental to the physical health of workers, Bosch power tools set out to reduce vibration from their equipment. Bosch power tools has reduced the vibration by 60% over the years. Along with the low vibration, Bosch power tools are designed for low sound emissions as well. The fan motors are pitched to be less irritating and pointed away from the user as well so little noise directly impacts the worker. Handles and weight distribution are designed to make the tools comfortable to grip and use. Buttons and switches are conveniently placed to make the operation of Bosch power tools easier to do one handed. Bosch power tools even have left handed equipment available. Bosch power tools are ergonomically friendly, tough enough to withstand abusive treatment and quick to make adjustments to while working. This allows more production to be accomplished in a professional setting. This also makes them some of the most expensive available. There is an old saying that you get what you pay for. With Bosch power tools, this is definitely true. 10 Power Tool Safety Tips debbie Johnston e07 Power tools are indispensable for professionals and those who tackle DIY home improvement jobs. They are favored as they help users to save time and they also make the job easier. However, they need to be handled carefully otherwise they can lead to injury. Mishaps usually occur due to negligence, boredom, and overconfidence. By keeping the following 10 safety issues in mind, it is possible to work satisfactorily and safely with power tools. 1. Safety glasses: These prevent dust, debris, wood shavings, shards from fiberglass, etc from getting into the eyes. Safety glasses are one of the most basic pieces of safety equipment that must be used when working with power tools. 2. Protection for the ears: Power tools can generate a lot of noise, which may sound louder in the cloistered environment of a workshop; in order to minimize damage to the ears, it is advisable to wear earplugs. 3. Knowing the right tools for the job: It is important to know the right tools for the job in order to avoid injury to oneself and damage to the materials. To this end, it is advisable to thoroughly read the instruction manuals provided with the equipment and get familiar with the recommended safety precautions. 4. Correct method of using tools: Tools should not be carried by their cords; tools that are not in use should be disconnected; and while handling a tool connected to a power source, fingers should be kept away from the on/off switch. 5. The right clothes: Long hair should be tied and loose clothing should be avoided. Ideally, clothing that covers the entire body should be worn and heavy gloves should be used in order to avoid sharp implements and splinters from hurting the hands. Masks prevent inhalation of harmful minute particles of the material that is being worked upon. Steel-toed work boots and hard hats can also be worn. 6. Tool inspection: Power tools should not be employed in wet environments and should never be dipped in water; they should be checked periodically for exposed wiring, damaged plugs, and loose plug pins. Nicked cords can be taped but if a cut appears to be deep, a cord should be replaced. Tools that are damaged or those that sound and feel different when used should be checked and repaired. 7. Cleanliness in the work area: This should be maintained because accumulated dust particles in the air can ignite with a spark. Of course, flammable liquids should be kept covered and away from the place where power tools are being used. An uncluttered work area also makes it easy to maneuver the power tool; often distractions caused by a tangled cord can result in an accident. 8. Care with particular tools: Miter saws and table saws should be used with a quick-release clamp and a wood push-through, respectively. Extra care should be taken while using nail guns and power belt sanders. 9. Keep tools in place: Power tools should be returned to their cabinets after use to prevent them from being used by an unauthorized and incapable person. 10. Lighting: It is important to use proper lighting while working with power tools, particularly when working in the basement and garage where lighting may not be satisfactory.
Debbie Johnston recommends Makita power tools. 2chttp://www.ideamarketers.com/./library/article.cfm?articleid=77862 | ||||||||||||||||||||
