| ||||||||||
 | ||||||||||
1. Safety glasses: These prevent dust, debris, wood shavings, shards from fiberglass, etc from getting into the eyes. Safety glasses are one of the most basic pieces of safety equipment that must be used when working with power tools. 2. Protection for the ears: Power tools can generate a lot of noise, which may sound louder in the cloistered environment of a workshop; in order to minimize damage to the ears, it is advisable to wear earplugs. 3. Knowing the right tools for the job: It is important to know the right tools for the job in order to avoid injury to oneself and damage to the materials. To this end, it is advisable to thoroughly read the instruction manuals provided with the equipment and get familiar with the recommended safety precautions. 4. Correct method of using tools: Tools should not be carried by their cords; tools that are not in use should be disconnected; and while handling a tool connected to a power source, fingers should be kept away from the on/off switch. 5. The right clothes: Long hair should be tied and loose clothing should be avoided. Ideally, clothing that covers the entire body should be worn and heavy gloves should be used in order to avoid sharp implements and splinters from hurting the hands. Masks prevent inhalation of harmful minute particles of the material that is being worked upon. Steel-toed work boots and hard hats can also be worn. 6. Tool inspection: Power tools should not be employed in wet environments and should never be dipped in water; they should be checked periodically for exposed wiring, damaged plugs, and loose plug pins. Nicked cords can be taped but if a cut appears to be deep, a cord should be replaced. Tools that are damaged or those that sound and feel different when used should be checked and repaired. 7. Cleanliness in the work area: This should be maintained because accumulated dust particles in the air can ignite with a spark. Of course, flammable liquids should be kept covered and away from the place where power tools are being used. An uncluttered work area also makes it easy to maneuver the power tool; often distractions caused by a tangled cord can result in an accident. 8. Care with particular tools: Miter saws and table saws should be used with a quick-release clamp and a wood push-through, respectively. Extra care should be taken while using nail guns and power belt sanders. 9. Keep tools in place: Power tools should be returned to their cabinets after use to prevent them from being used by an unauthorized and incapable person. 10. Lighting: It is important to use proper lighting while working with power tools, particularly when working Tips and Ideas for Making Bead Christmas Ornaments Rob Buenaventura Have you always wanted to create your own beaded ornaments but have little experience with bead work? Provided in this article are some simple tips that will help you create stunning and beautiful hand made beaded Christmas ornaments that will make your home more festive this holiday season. If you have never made bead Christmas ornaments, you will first need to select either a pattern or a kit. There are many kits available that typically include the beads, needle, thread, glue and any other materials required to begin making bead Christmas ornaments. The next step is to assemble the proper tools. Tools Needed for Your Hand Made Christmas Ornaments Pliers are the most important tool for getting started in making your hand made bead Christmas ornaments. Important pliers that are used with bead making include Flat Nose Pliers, Round Nose Pliers, Chain Nose Pliers, Crimp Nose Pliers, and Split Ring Pliers. Another tool you will need is a good pair of wire cutters. If you are making wire bead Christmas ornaments, then wire cutters are absolutely essential. When selecting wire cutters it is important to select the appropriate strength wire cutter for the wire that you will be using. Wire cutters come in both lightweight and heavy-duty strengths. Light weigh cutters will suit your basic needs for the beading wire you will be using. Lastly, when making hand made Christmas Bead ornaments purchase bead needles. These needles come in a variety of sizes. Choose needles applicable to the project you are making. Different Types of Hand Made Christmas Bead Ornaments A simple bead ornament recommended for a young child to make may consist of little more than stringing pony beads or other suitable bead onto pipe cleaners. Children can simply place the beads on the pipe cleaners then twist them into various shapes such as bells, stars, candy canes, and Christmas trees. Here is another way that you can create sparkling and beautiful hand made Christmas bead ornaments no experience required. First gather your supplies. These will include fabric paints (or other dimensional paint), small glass beads (or seed beads) satin finished ornaments, a small tray, and a small cup. First, sketch a simple shape on the ornament with the fabric paint. Ideas for shapes typically include simple snowflakes, trees, and stars, but ultimately the choice is up to you. Create your pattern as simple or as elaborate as you like. After you have drawn your design on the satin ornament with the fabric paint, hold the ornament over a small tray, and sprinkle the tiny beads over the ornament using a small cup. This is similar to projects where you apply glue and then sprinkle glitter over the glue. After your ornament finishes drying, you can hang it with a beautiful cord or complimentary satin ribbon. It's as easy at that! So go ahead and gather your supplies and get started making your own personalized hand made Christmas ornaments for the holidays! http://www.ezinearticles.com/?Tips-and-Ideas-for-Making-Bead-Christmas-Ornaments&id=115738 |
