| ||||||||||||||||||||
![]() | ||||||||||||||||||||
|
||||||||||||||||||||
1. Safety glasses: These prevent dust, debris, wood shavings, shards from fiberglass, etc from getting into the eyes. Safety glasses are one of the most basic pieces of safety equipment that must be used when working with power tools. 2. Protection for the ears: Power tools can generate a lot of noise, which may sound louder in the cloistered environment of a workshop; in order to minimize damage to the ears, it is advisable to wear earplugs. 3. Knowing the right tools for the job: It is important to know the right tools for the job in order to avoid injury to oneself and damage to the materials. To this end, it is advisable to thoroughly read the instruction manuals provided with the equipment and get familiar with the recommended safety precautions. 4. Correct method of using tools: Tools should not be carried by their cords; tools that are not in use should be disconnected; and while handling a tool connected to a power source, fingers should be kept away from the on/off switch. 5. The right clothes: Long hair should be tied and loose clothing should be avoided. Ideally, clothing that covers the entire body should be worn and heavy gloves should be used in order to avoid sharp implements and splinters from hurting the hands. Masks prevent inhalation of harmful minute particles of the material that is being worked upon. Steel-toed work boots and hard hats can also be worn. 6. Tool inspection: Power tools should not be employed in wet environments and should never be dipped in water; they should be checked periodically for exposed wiring, damaged plugs, and loose plug pins. Nicked cords can be taped but if a cut appears to be deep, a cord should be replaced. Tools that are damaged or those that sound and feel different when used should be checked and repaired. 7. Cleanliness in the work area: This should be maintained because accumulated dust particles in the air can ignite with a spark. Of course, flammable liquids should be kept covered and away from the place where power tools are being used. An uncluttered work area also makes it easy to maneuver the power tool; often distractions caused by a tangled cord can result in an accident. 8. Care with particular tools: Miter saws and table saws should be used with a quick-release clamp and a wood push-through, respectively. Extra care should be taken while using nail guns and power belt sanders. 9. Keep tools in place: Power tools should be returned to their cabinets after use to prevent them from being used by an unauthorized and incapable person. 10. Lighting: It is important to use proper lighting while working with power tools, particularly when working Public Relations: Power Tool for the 21st Century Robert A. Kelly 15cd I address this article to businesses, associations, non-profits and public entity managers seeking a direct connection between the money they're planning to spend on public relations, and the achievement of their organizational objectives. We can save a lot of time - you and I - if we can agree onone point: I believe that deep down - and I mean DEEP down - most chief executives understand that doing something about thebehaviors of their most significant external audiences can rank inimportance right up there with increased sales and earnings.Whether they do anything about it or not is another question.But I believe many sense - as do legislators who know they cannot govern without the consent of the governed - that managements cannot govern their enterprises without the support and understanding of their most important audiences. I refer to audiences such as members, supporters, customers, sponsors, prospects, regulators, employees, thoughtleaders, public interest groups and the like. If I'm right, there are some bright days ahead in this new century not only for public relations people but world commerce as well. Fortunately for all concerned, that success will spring from the fundamental premise of public relations: people act on their own perception of the facts, and those perceptions lead to behaviors aboutwhich something can be done. When public relations creates, changesor reinforces that opinion by reaching, persuading and moving-to-desired-action those people whose behaviors affect the organization, the public relations effort is a success. What that should mean to a CEO seems obvious. I guess that money I'm spending on public relations really could result in the kindof change in behaviors of my key stakeholders that leads directly to the achievement of my organizational objectives. That conclusion will let us do what we do best - reach those key audience perceptions with the facts as we know them. Hopefully, the messages we use will be clear and persuasive, and will create, change or reinforce perceptions as needed, then alter behaviors in the employer/client's direction. When the problem solving sequence is completed, that particular public relations mission is accomplished. However, we must constantly guard against simply emphasizing those communications tactics we fervently HOPE will reach the target audience. Instead, we must go further and actively track how well those tactics and persuasivemessages are altering the perception of that target audience. And then monitor to what degree audience behaviors have moved in our direction.This matters in a very important way. Management really CAN establish the desired behavior change up front in the planning phase, then insist on getting that result before pronouncing the public relations effort a success. In other words, getting their public relations money's worth! This is powerful stuff! A chief executive of an association, a business, a non-profit and even a public entity can work with his or her public relations counsel and agree in the planning phase what theymust do to achieve a specified adjustment in the behaviors of a really important external audience. Even better, the way to do this is well-known in the public relations business: select your target audience; What will the employer/client want from us as we move ahead into the 21st Century? I believe s/he will want us to apply our special skills in a way that helps achieve his or her business objectives. But when will that employer/client of ours be fully satisfied with the public relations results we have achieved? Only when our reach, persuade and move-to-desired-action efforts have producedthe visible modification in the behaviors of those target audiences they wish to influence. Let me conclude our look at Public Relations: Power Tool For The 21st Century by highlighting once again the three benefits our employer/client will continue to receive when the behavioral changes become apparent and meet the program's original behavior modification goal. 1. Their public relations program will be a success. 2. By achieving the behavioral goal they set at the beginning of the program, they will be using a dependable and accurate public relations performance measurement. 3. When our reach, persuade and move-to-desired-action efforts produce that visible modification in the behaviors of those people they wish to influence, they will be using public relations' core value to its very best advantage ensuring that they really DO receive their money's worth. Please feel free to publish this article and resource box in your ezine, newsletter, offline publication or website. A copy would be appreciated at bobkelly@TNI.net. Robert A. Kelly © 2004. 2chttp://www.ezinearticles.com/?Public-Relations:-Power-Tool-for-the-21st-Century&id=17077 | ||||||||||||||||||||