| ||||||||||||||||||||
 | ||||||||||||||||||||
|
||||||||||||||||||||
1. Safety glasses: These prevent dust, debris, wood shavings, shards from fiberglass, etc from getting into the eyes. Safety glasses are one of the most basic pieces of safety equipment that must be used when working with power tools. 2. Protection for the ears: Power tools can generate a lot of noise, which may sound louder in the cloistered environment of a workshop; in order to minimize damage to the ears, it is advisable to wear earplugs. 3. Knowing the right tools for the job: It is important to know the right tools for the job in order to avoid injury to oneself and damage to the materials. To this end, it is advisable to thoroughly read the instruction manuals provided with the equipment and get familiar with the recommended safety precautions. 4. Correct method of using tools: Tools should not be carried by their cords; tools that are not in use should be disconnected; and while handling a tool connected to a power source, fingers should be kept away from the on/off switch. 5. The right clothes: Long hair should be tied and loose clothing should be avoided. Ideally, clothing that covers the entire body should be worn and heavy gloves should be used in order to avoid sharp implements and splinters from hurting the hands. Masks prevent inhalation of harmful minute particles of the material that is being worked upon. Steel-toed work boots and hard hats can also be worn. 6. Tool inspection: Power tools should not be employed in wet environments and should never be dipped in water; they should be checked periodically for exposed wiring, damaged plugs, and loose plug pins. Nicked cords can be taped but if a cut appears to be deep, a cord should be replaced. Tools that are damaged or those that sound and feel different when used should be checked and repaired. 7. Cleanliness in the work area: This should be maintained because accumulated dust particles in the air can ignite with a spark. Of course, flammable liquids should be kept covered and away from the place where power tools are being used. An uncluttered work area also makes it easy to maneuver the power tool; often distractions caused by a tangled cord can result in an accident. 8. Care with particular tools: Miter saws and table saws should be used with a quick-release clamp and a wood push-through, respectively. Extra care should be taken while using nail guns and power belt sanders. 9. Keep tools in place: Power tools should be returned to their cabinets after use to prevent them from being used by an unauthorized and incapable person. 10. Lighting: It is important to use proper lighting while working with power tools, particularly when working 3 Ways to Change Roadblocks into Valuable Tools Catherine Pratt Our initial reaction when hitting a setback or a roadblock, whether it be during an important project or even just trying to finish a task, is usually one of frustration or the thoughts of “Why does this always happen to me?” or “why doesn't anything ever work for me?”. Roadblocks can be valuable though. Here's how: For example: say you want to publish a “How to” book. You get it all set up and then find out that it's going to be too expensive to get it printed. You could just give up on the idea or you could brainstorm. For example: - could you create an e-book instead? - could you print it off yourself? - could you simply alter things to make it cheaper (ie. Less colour pictures, use only 2 colours, etc.)? - could you find a technical college which may be willing to do this cheaper as students would be working on it? - would it be better as a web site? The benefits of brainstorming like this is you may figure out a far better idea than the one you had originally. You may end up really glad that you didn't go with the original plan. If you can think of your roadblocks as a challenge then you avoid falling into the victim trap. Your confidence to achieve your goal will increase as you know it can be done. You just need to figure out if there's a better way. Think of them as “silver linings” and you'll be amazed at what ideas you suddenly come up with. Your goal may suddenly become closer than you thought and be an even greater achievement and all because you knew a roadblock could be a really valuable tool. You just needed to know how to use them. http://www.ezinearticles.com/?3-Ways-to-Change-Roadblocks-into-Valuable-Tools&id=65045 | ||||||||||||||||||||
