| ||||||||||||||||||||
![]() | ||||||||||||||||||||
|
||||||||||||||||||||
What is Hand Arm Vibration? Hand Arm Vibration is the effect of long term or extreme vibration exposure from power tool use. It can result in the following medical conditions. vibration white finger carpal tunnel syndrome permanent and painful tingling and numbness in the hands and arms damage to bones in the hands and arms painful joints and muscle weakening Not too nice is it? It is estimated that hundreds of thousands have advanced vibration white finger. Minimizing HAV More modern tools are designed to reduce vibration. Some tools isolate the human contact zone from the vibrating parts - which is excellent. So in purchasing power tools for yourself or your employees consider this very strongly, not just to be a nice fellow but as far has health and safety go it is a sound investment. International codes have been implemented that require revealing the vibration level of a tool. The units of vibration are in meters/second/second. Try to avoid using tools above 2.5 Regular maintenance and tuning of tools will keep them operation at recommended level, and always give appropriate training in using the tool and using the right power tool for the job. Power tools are great and used safely they are even better. Carnivorous Plants and Black Bears Jacob Farin Carnivorous plants native to the United States are accustomed to cold temperatures, frost and snow. That is what really makes these plants very unique. They may look tropical, but really they are as hardy as a black bear in the Rockies. But, like the black bear, there is something that frost-tolerant plants do not like – dry freezing Arctic wind. This type of wind will pull moisture right out of your plant and cause your plant to wither away. There are couple ways to protect your plants from the wind, while making sure they stay in hibernation. Wind protection is only necessary if you live in zones 5 or below and temperatures routinely go below 20°F for more than a week at a time. Like the black bear, you can place your plants in a cave. If you do not have a cave in your backyard, place your plants in an unheated garage, tool shed or cold frame, which is essentially an unheated greenhouse. Because the plants are dormant and has stopped growing for the winter, light is not much of an issue. Just make sure the soil is always moist. You can maintain its moisture by keeping the plant in no more than 1/4-inch of water. Before placing your plants in your cave, so to speak, follow these important steps: 1. Cut off all dead leaves. With any of the Sweet Pitchers (Sarracenia rubra), trim all the leaves right down to the rhizome. This will help reduce moisture loss. There is no need to do this other species. 2. Give the plant a good spraying with a sulfur-based fungicide. (We use Safer brand.) Follow the instructions as directed by the manufacturer. 3. Place your plant in an unheated shelter, and keep the soil moist at all times. This is perhaps the simplest method of protecting your plant from the dry freezing Arctic wind. Just remember that it is not frost that destroys outdoor container plants. It is dry freezing wind. In April, it will be safe to bring your plants out of dormancy, which happes to be about the same time black bears come back out and begin foraging. If you live in zones 6 and above, wind protection is necessary when there is a brief cold snap, bringing the temperature down below 20°F. In this case, wind protection is usually temporary and covering your plants with a tarp or sheets of plastic will do the trick. About the AuthorJacob Farin is co-owner of Sarracenia Northwest, a nursery specializing in the cultivation of carnivorous plants. More information about the cultivation of carnivorous plants can be found at http://www.cobraplant.com. http://www.aaarticles.com/article25967.html | ||||||||||||||||||||